IDX High Performance LED Light (Suit SSL-JVC50 Battery)
Item usually ships within 7-10 business days, direct from Australian distributor.
The IDX X10-Lite Hi-Performance LED On-Camera Light mounts to a standard accessory shoe on your camera, and provides a powerful beam that can be dimmed from 100 to 0% without affecting the beam quality. The LEDs in the unit are rated to last up to 50,000 hours, and the unit powers from available IDX SSL-JVC50 type batteries (not included). You can also power the unit from a 6 to 17 volt DC source using the included D-Tap connector.
A sealed, scratch resistant lens protects the LEDs, and they deliver 1450 lux at 1m, with a 90° beam spread. This allows you to light a relatively large area from an on-camera light. For a tighter beam, you can flip up the bottom barndoor, which will adjust the beam spread to 45°, giving you more control, and less spill. The LEDs produce light with a color temperature of 4500K, which is roughly halfway between daylight and tungsten values. The barndoors incorporate a color correction filter that you can fold in front of the light to convert the color temperature from 4500K to 3200K.
The X10-Lite is an on-camera light that features dimming from 100 to 0%, without affecting the quality of the beam.
The standard beam angle is 90°, however, by flipping up the bottom barndoor in front of the light, you convert the beam angle to 45° for a more spotty beam.
The light has a color temperature of 4500K, which puts it approximately halfway between daylight and tungsten. Using this light with daylight (5600K) balanced units will result in the light causing a slight warming on the subjects you illuminate it with, when the camera is set to daylight balanced.
The barndoors feature a color correction filter, that you can flip down to cover the LEDs, and this will convert the lights output from 4500K to 3200K, so you can mix it with traditional tungsten lighting with color temperature issues. Lamp Type 10 x LED
Color Temperature 4500K
3200K (with included filter)
Brightness 1450 lx @ 1 m
Beam Angle Standard: 90°
Dimmer Response 100 to 0%
Mount Type Cold Shoe
Input Voltage 6.0 to 17.0 VDC
Power Consumption 16W Max.
Power Connector D-Tap
IDX SSL-JVC50 type
Dimensions (WxDxH) 4.25 x 5.07 x 5.90" (108 x 129 x 150 mm)
Weight Approx. 1.03 lb (470 g)
Package Weight 1.95 lb
Box Dimensions (LxWxH) 9.1 x 6.1 x 5.2" IDX X10-Lite Hi-Performance LED On-Camera Light
D-Tap Power Connector
Limited 2-Year Warranty PRODUCT HIGHLIGHTS
Fully Adjustable Dimmer 100 to 0%
50,000 Hour Lifespan
Power by IDX SSL-JVC50 Type Battery/D-Tap
1450 Lux at 1m
90° Beam Spread
Barndoors Feature 45° Spot
4500K Color Temperature
Barndoors Feature Tungsten CC Filter
We understand that sometimes you may need to return a product you have purchased from Vizcom Technologies. To assist you, we have set out the Vizcom Technologies Returns Policy in more detail under our terms and conditions page.
1. Australian Consumer Law
Our Returns Policy includes, and does not seek to exclude or limit, the rights you have under the Australian Consumer Law (if you are a consumer) and other relevant laws.
If you are a consumer under the Australian Consumer Law:
- Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For more information on product warranties please refer to the individual manufacturers warranty period.
Vizcom also Recommends
Questions & Answers
Have a Question?
Be the first to ask a question about this.