IDX 4-Position Power Base Station
Item usually ships within 7-10 business days, direct from Australian distributor.
The IDX EB-424L V-Mount Power Base Station is a field-portable lithium-ion battery, which supports up to 8 ENDURA batteries to power up to 744Wh in PowerLink or dual stack mode on 4 V-Mount plates. Used in environments where voltage and current capacity are a challenge, it is compatible with high-end broadcast camera systems such as Sony F23, Sony F35, and RED ONE. The batteries can be changed over without interrupting the normal operation.
If the main AC is disconnected or fails at any point of time, the power base mode provides a battery backup to prevent any loss of critical production material or shooting delay. The base station comes with 2 output terminals - industry standard 12V and professional 24V. A dedicated 24V output switch allows selection of the output voltage of the LEMO connector; it can be used separately or simultaneously. Depending on cable/pin configuration, the 12V output is continuous from both the LEMO and XLR connector (when the 24V switch is active). The maximum current is 20A for 12V (10A each output), and 5A for 24V.
The base station features a LED indicator for 24V output, which includes detection of protection circuit and dual low voltage warning when below 14V and 12V. The lightweight (approx. 2.87 lbs) Power Base Station has a compact size, and comes with an extendable feet up to 5.04" (W), making it suitable for use in studio and desktop surfaces.
Field portable V-mount lithium-ion battery
Supports up to 8 ENDURA batteries - power up to 744Wh in powerlink or dual stack mode on 4 V-mount plates
Designed for use in environments where voltage and current capacity are a challenge
Compatible with high-end broadcast camera systems such as Sony F23, Sony F35, RED ONE
Battery backup station - no critical production material is lost or shooting is delayed
2 output terminals - industry standard 12V and professional 24V
LED indicator for 24V output includes detection of protection circuit, dual low voltage warning when below 14V and 12V
Maximum current of 12V is 20A (10A each output); in 24V operation, the maximum current is 5A
Selection of 12V or 24V output voltage of the LEMO connector via a dedicated 24V output switch.
Activation of power switch turns on pilot LED; 24V is output from the LEMO connector
Additionally, 12V output is always continuous from both the LEMO and XLR connector depending on how the cable/pin is configured (when the 24V switch is active)
Output voltage - 24V (regulated)/12V (unregulated), which can be selected separately or simultaneously
Uninterrupted battery change-over during normal operation
Lightweight (approx. 2.87 lbs)
Extendable feet - up to 5.04" (W)
We understand that sometimes you may need to return a product you have purchased from Vizcom Technologies. To assist you, we have set out the Vizcom Technologies Returns Policy in more detail under our terms and conditions page.
1. Australian Consumer Law
Our Returns Policy includes, and does not seek to exclude or limit, the rights you have under the Australian Consumer Law (if you are a consumer) and other relevant laws.
If you are a consumer under the Australian Consumer Law:
- Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For more information on product warranties please refer to the individual manufacturers warranty period.
Vizcom also Recommends
Questions & Answers
Have a Question?
Be the first to ask a question about this.