IDX CW-7 V-Mount Uncompressed Wireless HD/SD-SDI Transmission System
Item usually ships within 7-10 business days, direct from Australian distributor.
The CW-7 V-Mount Uncompressed Wireless HD/SD-SDI Transmission System is a transmitter and receiver set that allows you to send an HD/SD-SDI signal up to 328 ft with zero frame delay (less than 1 ms). It supports resolutions up to 1080i60/50 uncompressed in YCbCr 4:2:2 10-bit with two channels of embedded audio. Featuring four discreet channels, the system supports unicast operation, wherein multiple transmitters and receivers can utilize the available channels, and multicast operation where one transmitter can send to up to four receivers at the same time.
The transmitter features one HD/SD-SDI input and one loop-output, and the receiver unit offers dual simultaneous HD/SD-SDI outputs. Both units feature a V-mount plates on both sides and a 4-pin XLR male power input. The transmitter is intended to be sandwiched in between a V-mount battery and V-mount plate on your camera. You can also use the XLR input to power the transmitter but it won't be able to pass power to the camera. Both units also have a 3/8"-16 thread for additional mounting options.
Both units have internal 24dBm antennas and operate on the license free 5 GHz frequency spectrum using a MIMO transmit method.
328 ft, Supports up to 1080i60/50 uncompressed in in YCbCr 4:2:2 10-bit with 2-ch embedded audio
Tx features one HD/SD-SDI input, one loop-output; Rx features dual simultaneous HD/SD-SDI outputs
V-mount plates on both sides and a 4-pin XLR male power input
Tx sandwiches in between a V-mount battery and V-mount plate on the camera
3/8"-16 threads on both units for additional mounting options
Internal 24dBm antennas
Operates on the license free 5 GHz frequency spectrum
MIMO transmit method
Dynamic Frequency Selection (DFS) allows operation on less crowded channels
4 discreet channels and 1 DFS on Tx and Rx; supports unicast and multicast operation. Input / Output Transmitter:
1x HD/SD-SDI input
1x HD/SD-SDI loop output
1x 4-pin XLR male power input
2x HD/SD-SDI outputs
1x 4-pin XLR male power input
Frequency 5.190 - 5.795 GHz
Frequency Selection 4 selectable channels and 1 DFS (Tx and Rx)
Transmission Range Up to 328 ft (100 m) in 1080i60/50
Transmission Power 80 mW maximum
Antenna Internal 24 dBm (Tx and Rx)
Transmit Method MIMO (multiple in / multiple out)
Modulation OFDM (Orthogonal Frequency Diversity Multiplexing)
Latency Zero frame (less than 1 ms)
Video Input HD-SDI (SMPTE 292M); SD-SDI (SMPTE 259M-C)
Video Format YCbCr 4:2:2 10-bit
Supported Resolutions HD 1080: 60i, 59.94i, 50i, 29.97p, 25p, 24p, 23.98p, 30PsF, 29.97PsF, 25PsF, 24PsF, 23.98PsF
HD 720: 59.94p, 50p
SD 525: 59.94i 625: 50i
Audio Ch 1 and 2 SDI embedded
Power Requirement 11-17 V DC via battery plate or 12 V DC via 4-pin XLR connector
Power Consumption 12 W approx.
Mounting Threads 3/8"-16 thread on each unit
Approvals FCC, CE, MIC (TELEC), and RoHS specifications
Dimensions 6.2 x 7.4 x 2.8" (5.7 x 18.8 x 7.1 cm)
Weight Transmitter: 1.9 lb (0.86 kg), Receiver: 1.8 lb (0.82 kg)
Package Weight 4.9 lb
Box Dimensions (LxWxH) 15.3 x 9.5 x 3.1" IDX CW-7 V-Mount Uncompressed Wireless HD/SD-SDI Transmission System
2 x V-Mount Male Plates
V-Mount Female Plates
2-Year Limited Warranty PRODUCT HIGHLIGHTS
HD/SD-SDI Wireless Transmitter/Receiver
Transmits 1080i60/50 4:2:2 Up to 328 ft
Less than 1ms Delay
Tx: 1x HD/SD-SDI Input, 1x Loop-Output
Rx: Dual Simultaneous HD/SD-SDI Outputs
V-Mount Plates on Both Sides
Additional 4-Pin XLR Male Power Input
Internal 24dBm Antennas
Operates on 5 GHz Band Using MIMO
4 Discreet Channels and 1 DF
We understand that sometimes you may need to return a product you have purchased from Vizcom Technologies. To assist you, we have set out the Vizcom Technologies Returns Policy in more detail under our terms and conditions page.
1. Australian Consumer Law
Our Returns Policy includes, and does not seek to exclude or limit, the rights you have under the Australian Consumer Law (if you are a consumer) and other relevant laws.
If you are a consumer under the Australian Consumer Law:
- Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For more information on product warranties please refer to the individual manufacturers warranty period.
Vizcom also Recommends
Questions & Answers
Have a Question?
Be the first to ask a question about this.